TSC TTP-247 Service Manual

ii
4.1 Ribbon and Gap/Black Mark Sensor Calibration ...................................... 52
4.2 Gap/Black Mark Calibration；Self-test；Dump mode .............................. 53
4.3 Printer Initialization ..................................................................................... 56
4.4 Black Mark Sensor Calibration ................................................................... 57
4.5 Gap Sensor Calibration .............................................................................. 57
4.6 Skip AUTO.BAS ........................................................................................... 57
5. GAP AND BLACK MARK SENSOR SELECTION ............................. 59
6. BIOS Update ...................................................................................... 59
7. DIAGNOSTIC TOOL .......................................................................... 60
7.1 Start the Diagnostic Tool ............................................................................ 60
7.2 Printer Function (Calibrate sensor, Ethernet setup, RTC setup………) .. 61
8. TROUBLESHOOTING ....................................................................... 62
9. MAINTENANCE ................................................................................. 66
UPDATE HISTORY ................................................................................ 68

TSC TTP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Resolution	203 dpi
Max Print Width	4.09" (104 mm)
Processor	32-bit RISC CPU
Weight	2.5 kg
Max Print Speed	7 ips
Memory	8 MB SDRAM, 4 MB Flash
Interface	USB 2.0, Serial
Ribbon Capacity	300 meters
Label Width	1" (25.4 mm) ~ 4.33" (110 mm)
Label Thickness	0.06 mm ~ 0.19 mm
Power Supply	External Universal Switching Power Supply
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Operating Humidity	25% to 85%, non-condensing
Certifications	CE, FCC, UL, CCC