16 OPERATING THE OVEN
To access the options menu:
1. Ensure the oven is cooling down or off.
2. Press and hold either the top left or top right
soft key for two seconds.
Enabling/Disabling the Edit Menu
Reference Figure 13. Enabling the Edit menu
allows operators to modify the cook cavity
temperature, group/item names, and recipe
settings. Disabling the Edit menu prevents
operators from accessing these options. By
default, the Edit menu is enabled.
To enable/disable the edit menu:
1. From the options menu, press the “Edit Menu”
soft key (top left) to turn the edit menu on/off.
2. Press the back/stop key to exit.
Erasing the Recipe Menu
Reference Figure 14. Erasing the recipe menu will
permanently delete currently-stored recipes and
recipe settings, and is generally not recommended.
To erase the recipe menu:
1. From the options menu, press the “Erase Menu”
soft key (middle left).
2. Press the enter key to confirm or the back/stop
key to cancel.
3. Press the back/stop key to exit.
NOTE: Erasing the recipe menu is not required
when uploading new settings from a smart card
(page 21).
Figure 13: Enabling/Disabling the Edit Menu
EDIT MENU ON
ERASE MENU
WRITE CARD OFF
TIME SCREEN ON
OVEN OPTIONS
DONE SCREEN ON
DEMONSTRATE OFF
Step: 2
To access the Options menu,
press and hold either key for two seconds.
The Edit menu is turned on.
Step: 1
Figure 14: Erasing the Menu
EDIT MENU ON
ERASE MENU
ERASE MENU?
WRITE CARD OFF
TIME SCREEN ON
OVEN OPTIONS
DONE SCREEN ON
PRESS “ENTER”
DEMONSTRATE OFF
Step: 3
After “Erase Menu” is selected, a
confirmation message appears.
Step: 1
Step: 2
To access the Options menu,
press and hold either key for two seconds.
To Next Page
Loading...
