Name: TurboChef HIGH H BATCH 2
Brand: TurboChef
Rating: 5 (1 reviews)

To Next Page

To Previous Page

18 OPERATING THE OVEN

Enabling/Disabling Done Screen

Reference Figure 17. Enabling the Done screen

allows the operator to:

Save an adjusted cook time

Cook an item longer after it reaches the end

of its cook cycle

Disabling it helps ensure all originally-programmed

cook times remain unaltered. By default, the Done

screen is enabled.

To enable/disable the Done screen:

1. From the Options menu, press the “Done

Screen” soft key (middle right) to turn the Done

screen on or off.

2. Press the Back/Stop key to exit.

Demonstration Mode

When enabled, demonstration mode will prevent

the oven from heating. This mode should remain

off unless otherwise instructed by TurboChef.

EDIT MENU ON

ERASE MENU

WRITE CARD OFF

TIME SCREEN ON

OVEN OPTIONS

DONE SCREEN ON

DEMONSTRATE OFF

Figure 17: Enabling/Disabling the Done Screen

Step: 2

Here the Done screen is turned on.

Step: 1

To access the Options menu,

press and hold either key for two seconds.

TurboChef HIGH H BATCH 2 Service Manual

Other manuals for TurboChef HIGH H BATCH 2