V02.00 | 2019/10
117
Parameter name Value Meaning Description
dec. Hex.
0 0x00 direct
The process data are not swapped.
i.e.: 0x0123 4567 89AB CDEF
1 0x01 Swap 16 bit The bytes are swapped per word.
i.e.: 0x2301 6745 AB89 EFCD
2 0x02 Swap 32 bit The bytes are swapped per double word.
i.e.: 0x6745 2301 EFCD AB89
3 0x03 swap all All bytes are swapped.
i.e.: 0xEFCD AB89 6745 2301
Process output
data mapping
(Mapping PDOUT)
see above Process input data mapping
Vendor ID 0…65535
0x0000…
0xFFFF
Enter the IDs for the port configuration check.
Device ID 0…65535
0x0000…
0xFFFF
VAUX1 pin 1 Cx
(chy/chz)
0 0x00 24 VDC
The 24 VDC sensor/actuator supply at pin 1 of the
connector is switched on.
1 0x01 switchable The 24 VDC sensor/actuator supply at pin 1 of the re-
spective connector is switchable via the process data.
2 0x02 off The 24 VDC sensor/actuator supply at pin 1 of the
connector is switched off.
VAUX2 pin 2 Cx
(chy)
0 0x00 24 VDC
The Class B supply at Pin2 of the respective connector
is switched on.
1 0x01 switchable The Class B supply at pin 2 of the respective con-
nector is switchable via the process data.
2 0x02 off The Class B supply at Pin2 of the respective connector
is switched off.
To Next Page
Loading...
