turck TBEN-L 8IOL Series - Page 127

V02.00 | 2019/10
127
Word
no.
Bit no.
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0x85 IO-Link port 2, assignment similar to port 1
0x86 IO-Link port 3, assignment similar to port 1
0x87 IO-Link port 4, assignment similar to port 1
0x88 IO-Link port 5, assignment similar to port 1
0x89 IO-Link port 6, assignment similar to port 1
0x8A IO-Link port 7, assignment similar to port 1
0x8B IO-Link port 8, assignment similar to port 1
IO-Link Events
0x8C Port (1st Event) Qualifier (1st Event)
0x8D Event Code low byte (1st Event) Event Code high byte (1st Event)
…
0xAA Port 16th Event) Qualifier (16th Event)
0xAB Event Code low byte (16th Event) Event Code high byte (16th Event)
Module status (status word)
0xAC - FCE - - - COM V1 - V2 - - - - - - DIAG
Meaning of process data bits
Name Value Meaning
I/O data
DIx Digital input x
0 No signal at DI (pin 4, SIO)
1 Signal at DI (pin 4, SIO)
DXPx configurable digital channel (DXP channel)
0 No input signal at DXP-channel (pin 2)
1 Input signal at DXP-channel (pin 2)
DVSx Input value valid (Data Valid Signal)
0 The IO-Link data are invalid.
Possible causes:
n Sensor supply is below the admissible range.
n IO-Link port is parameterized as simple digital input.
n No device connected to the master.
n No input data received from the connected device (only
valid for devices with an input data length > 0).
n No reaction from the connected device to the sending of
output data (only valid for devices with an output data
length > 0).
n The connected device sends an process input data in-
valid error.
1 The IO-Link data are valid.
IO-Link process input
data
Process input data of the connected device The order of the IO-Link
process input data can be changed via the parameter Process input
data mapping.
Diagnostics
[}130]
IO-Link Events
[}122]