Chapter 7. Built-in control panel
7.1. Information displayed on the operator panel without removing the inverter cover
The information displayed on the Operator Panel changes cyclically (screens 1 - 6) without user intervention.
Those screened parameters are:
• Screen 1: producer logo, date and time.
• Screen 2:daily generated electrical energy graph.
Fig. 7.2. Screen 1
Fig. 7.3. Screen 2
• Screen 3: if inverter detects any fault, failure screen will appear and display present failure “Fault
the previous fault “Previous Fault”
• Screen 4: the input voltages and currents values of the inverter.
Fig. 7.4. Screen 3
Fig. 7.5. Screen 4
• Screen 5:
• Total generated energy from first run-up to present.
• Present output power.
• Present output current.
• Temperature of inverter.
• Velocity of wind.
Fig. 7.6. Screen 5
To Next Page
Loading...
