TYAN S7050 - 3 PHD_4: ME RECOVERY MODE Jump; 3 PHD_5: BIOS RECOVERY Jumper; 3 PHD_6: COM Select; 3 PHD_7: COM Select

http://www.TYAN.com
33
3PHD_4: ME RECOVERY MODE Jump
Pin 1 2 3
Signal
NC FM_ME_RCVR_N GND
Normal (Default)
1-2: Normal Mode (Default)
ME Recovery
2-3: ME Inforce Update Mode
3PHD_5: BIOS RECOVERY Jumper
Pin 1 2 3
Signal
NC
BIOS_RCVR_BOOT_N
GND
Normal (Default)
1-2: Normal Mode (Default)
ME Recovery
2-3: BIOS Recovery mode
3PHD_6: COM Select
Pin 1 2 3
Signal
BMC_COM2_RXD RXD_2 BMC_COM5_RXD
NOTE： 1-2: BMC UART2 to COM2 (default) 2-3: BMC UART5 to COM2
3PHD_7: COM Select
Pin 1 2 3
Signal
BMC_COM2_TXD COM_RX RXD5
NOTE： 1-2: BMC UART2 to COM2 (Default) 2-3: BMC UART5 to COM2