TYAN S7050 - 2.4 Installing the Processor

http://www.TYAN.com
38
2.4 - Installing the Processor
Your brand new S7050, Only Intel
®
“Sandy Bridge series” processors are
certified and supported with this motherboard. Check our website for latest
processor support. http://www.tyan.com
NOTE: TYAN
®
is not liable for damage as a result of operating an unsupported
configuration.
Locate the CPU socket (LGA 2011) on the motherboard:
To install a CPU:
1. Press the load lever (A) hard
with your thumb first, move it to
the right. Then press the load
lever(B) and move it to the left
until the load plate is released
from the retention tab.
2. Lift the load plate in the
direction of the arrow until it is
fully opened.
3. Remove the PnP cap from the
CPU socket.