TYAN S7050 - QPI Configuration Submenu; Isoc; QPI Link Speed Mode; QPI Link Frequency Select

http://www.TYAN.com
89
3.7.1.2 QPI Configuration Submenu
Isoc
Enable/Disable Isoc.
[Enabled]/[Disabled]
Default is [Enabled]
QPI Link Speed Mode
Select the QPI link speed as either the Fast Mode or the Slow Mode.
[Fast]/[Slow]
Default is [Fast]
QPI Link Frequency Select
Select the QPI Link Frequency.
[Auto]/[6.4GT/s]/[7.2GT/s]/[8.0GT/s]
Default is [Auto]
QPI LinkOs
Enable/Disable QPI LinkOs.
[Enabled]/[Disabled]