TYAN S7050 - Compatibility RID; Memory Mode; Perfmon and DFX Devices

http://www.TYAN.com
83
Compatibility RID
Support for Compatibility Revision ID (CRID) Functionality mentioned in Sandy
Bridge BIOS spec.
[Enabled]/[Disabled]
Default is [Enabled]
Total Memory / Current Memory Mode / Current Memory Speed / Mirroring /
Sparing
Read only.
Memory Mode
Select the mode for memory initialization.
[Independent]/[Mirroring]/[Lock Step]/[Sparing]
Default is [Independent]
Perfmon and DFX devices
Perfmon and DFX devices can be hidden or unhidden
[HIDE]/[UNHIDE]
Default is [HIDE]
DRAM RAPL MODE
DRAM RAPL MODES: Disabled/MODE0/MODE1
[Disabled] / [DRAM RAPL MODE0] / [DRAM RAPL MODE1]
Default is [DRAM RAPL MODE1]
DDR Speed
Force DDR Speed.
[Auto]/[Force DDR3 800]/[Force DDR3 1066]/[Force DDR3 1333]/[Force DDR3
1600]/[Force DDR3 1866]
Default is [Auto]
Channel Interleaving
Select different Channel Interleaving setting.
[Auto]/[1 Way]/[2 Way]/[3 Way]/[4 Way]
Default is [Auto]
Rank Interleaving
Select different Bank Interleaving setting.
[Auto]/[1 Way]/[2 Way]/[4 Way]/[8 Way]
Default is [Auto]
Patrol Scrub
Enable/Disable Patrol Scrub.
[Enabled]/[Disabled]
Default is [Enabled]