TYAN S7050 - Power BTN1: Power Button; Clear BTN1: Clear CMOS; Onboard ID LED

http://www.TYAN.com
37
Power BTN1: Power Button
Normal
(Default)
Power On
You can Power the system by press the button.
Clear BTN1: Clear CMOS
Normal
(Default)
Clear CMOS
You can reset the CMOS settings by press this
button once. This can be useful if you have forgotten
your system/setup password, or need to clear the
system BIOS setting.
1. Power off system and disconnect power
connectors from the motherboard.
2. Press the button to clear CMOS.
3. Reconnect power connectors to the motherboard
and power on system.
Onboard ID LED
Pin Signal
+ V3AUX
- GND
State Color Description
On Blue System identified
+
-
Off Off System not identified
NOTE:
You can identify the specific system using this LED. Users
from remote site could also activate ID LED by input a few
commands in IPMI, detailed software support please visit
http://www.tyan.com
for latest AST2300 user guide.