Ubee DDW3611 User Manual

Ubee Interactive Understanding Default Values and Logins
Ubee DDW3611 Wireless Cable Modem Gateway Subscriber User Guide • November 2012 7
Security
 VPN Pass-Through (IPSec/L2TP/PPTP)
 NAT Firewall, MAC/IP/Port Filtering, Parental Control
 1 DMZ Host supported
 252 DHCP Private IP Hosts supported by default.
 Stateful Packet Inspection (SPI), DoS Attack Protection
 WPS/ WPA/ WPA2/ WPA-PSK& 64/128-bit WEP Encryption (Default: WPA2-PSK)
 TACACS or RADIUS Authentication
Wireless and Network
 Supports 4 SSIDs, 802.11b/g/n compliant with speeds up to 300 Mbps (2 transmit,
x 2 receive antennas)
 DHCP Client/Server / Static IP network assignment
 RIPv1/ v2
 Ethernet 10/100/1000 BaseT/full-duplex auto-negotiate functionality, IPv4 to IPv6
support.
Device Management
 Customer premises equipment (CPE)
 Supports IEEE 802.11e Wi-Fi Multimedia (WMM) and UAPSD (power savings)
 Web-Based Configuration
 Telnet Remote Management
 Secure Firmware Upgrade via TFTP
 Configuration Backup and Restore
 SNMP Support
 Interoperability with main CMTS products
Physical and Environmental
 Dimensions: 6.77” (172.2mm) x 10” (254mm) x 1.65” (42mm)
 Weight: 1.1 pounds (500 grams)
 Power: 12V/1.5A switching power supply
 Operating Temperature: 32°F ~ 104°F (0°C ~ 40°C)
 Humidity: 5 ~ 90% (non-condensing)
1.7 Understanding Default Values and Logins
The DDW3611 is pre-configured with the following parameters:
Local Port Address: 192.168.100.1, Web Interface: http://192.168.100.1
Operation Mode: NAT Mode
Subnet Mask: 255.255.255.0

Ubee DDW3611 Specifications

General

Brand	Ubee
Model	DDW3611
Category	Gateway
Language	English