Ubee DDW3611

Using the Primary Network Option Ubee Interactive
64 Ubee DDW3611 Wireless Cable Modem Gateway Subscriber User Guide • November 2012
6.2.1 Enabling a Closed Network
You can enable the Closed Network option so the SSID cannot be broadcast or seen by
others.
Steps
To enable a closed network:
1. Disable the WPS automatic security configuration.
2. Click Apply.
3. Access the pull down menu for the Closed Network.
4. Choose Enabled to close the network to other users.
WPS Setup AP
UUID Defines the universal unique identifier (UUID) for this access
point.
PIN Defines a randomly generated Personal Identification Number
(PIN) for the access point.
WPS Add Client
Add a client Activates wireless protected setup (WPS) security on the
device.
To add a client:
1. Click Add a client. The WPS Add Client screen is
displayed.
2. Click PUSH on the WPS Add Client screen.The WPS
button is activated on the device, indicated by a flashing
white light on top of the unit.
3. Press the WPS button on the device.
Client PIN Defines a PIN number for client access.
Authorized Client MAC Defines the MAC address of the authorized client.
Apply Saves WPS configurations when clicked.
Label Description