Ubee Interactive Using the User Defaults Option
Ubee DDW3611 Wireless Cable Modem Gateway Subscriber User Guide • November 2012 85
2. Click Password from the left side of the screen. The Password fields are explained
following this screen example.
Field descriptions are listed below the screen example
9.5 Using the User Defaults Option
The User Defaults option allows you to restore factory defaults to the Firewall and
Parental Control settings. All other networking setting are not cleared and reset (for
example, wireless settings).
Restoring factory defaults to the system resets the user login/password to the device.
Refer to Understanding Default Values and Logins on page 7 for the default values.
1. Click the Tools link from the top of the screen.
2. Click User Defaults from the left side of the screen. The User Defaults fields are
explained following this screen example.
Label Description
User Name Allows you to enter a new user name for the user account to
this Web interface of the DDW3611. See Understanding
Default Values and Logins on page 7 for more information on
logins and defaults. Enter the new Password and re-enter the
new password to confirm. Click Apply to save the changes.
New Password Allows you to enter a new password for the user account.
Confirm Password Allows you to re-enter the new password to confirm.
Apply Saves all changes when clicked.