Using the IP Filtering Option Ubee Interactive
44 Ubee DDW3611 Wireless Cable Modem Gateway Subscriber User Guide • November 2012
5.9 Using the IP Filtering Option
IP Filtering allows you to filter IP addresses and block Internet traffic to specific network
devices on the LAN. Any host on this list is not accessible to Internet traffic.
For more information, refer to Using the DHCP Static Lease Option on page 37. A static
lease ensures that the device always gets the same IP address. That way, if filtered, it
gets filtered continuously. Otherwise, the IP address would change for the device and the
filtering rule would no longer work.
You may also filter by MAC address which does not require setting a static lease.
Refer to Using the MAC Filtering Option on page 43.
Label Description
Index Assigns an index number to the rule.
MAC Address Defines the MAC address to block.
Clear Deletes the filtering rule when the Apply button is clicked and
the Clear box is checked.
View Additional Rules: Displays rules 11-20 when selected from the drop-down list, if
they exist. A total of twenty rules are supported.
Apply Saves all screen changes when clicked.
To Next Page
Loading...
