Using the Advanced Gateway Options Ubee Interactive
40 Ubee DDW3611 Wireless Cable Modem Gateway Subscriber User Guide • November 2012
5.7 Using the Advanced Gateway Options
The Options selection allows you to define what networking protocols are enabled or
disabled on the device. The network address translation application-level gateway (NAT
ALG) settings provide additional security beyond the firewall.
To enable or disable network protocols:
1. Click Gateway from the main menu.
2. Click Options from the left side menu. Field descriptions are listed below the screen
example.
Label Description
Enable SNTP Enables (Yes) or disables (No) the SNTP feature.
Current Time Displays the current system time.
System Start Time Displays the accumulated time since the system was started.
Time Server 1 Defines the IP address or Domain name of the time server.
Use the one provided or enter an alternative choice.
Time Server 2 Defines the IP address or Domain name of the time server.
Use the one provided or enter an alternative choice.
Time Server 3 Defines the IP address or Domain name of the time server.
Use the one provided or enter an alternative choice.
Time Zone Offset Defines the time zone offset in hours and minutes from
Greenwich MEan Time. For example: 8 hours means GMT
+8, -1 hour means GMT -1.
Apply Saves all screen changes when clicked.
Reset Values Resets the screen to factory defaults when clicked.
To Next Page
Loading...
