Using the Parental Control User Setup Option Ubee Interactive
76 Ubee DDW3611 Wireless Cable Modem Gateway Subscriber User Guide • November 2012
To configure user accounts:
1. Click Parental Control from the main menu.
2. Click User Setup from the left side menu. Field descriptions are listed below the
screen example.
Note: To enable Parental Control, refer to Using the Basic Option on page 77.
Label Description
Add User
Remove User
Enable
Defines user accounts.
To select an existing user, choose the user from the User
Settings pop-up menu.
To add a new user, add the user name and click Add.
To activate the user, check Enable.
To remove a user, select the user from the pop-up menu
and click Remove User.
Password Defines the password for this user. It is required when this
user tries to access the Internet via the device.
Re-Enter Password Checks the password with the re-entered password.
Trusted User Defines the selected user as a trusted user when enabled is
checked. The user is limited to timing and content when
visiting the Internet, as defined in the following fields.
Content Rule Selects from the pop-up menu an existing content rule that
defines what kind of Websites the user can visit or not.
To Next Page
Loading...
