UNI-T UTD1025CL User Manual

UTD1000L User Manual
21
Stop Restore Data Collection Trigger Frequency Count Setting/
1.
2. Press key RUN/STOP to restore data collection
and the oscilloscope shall restart collecting data.
To operate under the following steps to open the
trigger frequency count:
1. Press key SHIFT character shift shall appear
on the right corner of screen
2. Press key UTILITY to show auxiliary function
menu
3. Press key F3 to select frequency count function
as open;
,
;
;
To operate under the following steps to stop data
collection
Press key RUN/STOP the oscilloscope shall
STOP data collection and trigger status on the
upper part of screen shall display STOP
,
.
Picture 4-10 Stop Data Collection
Picture 4-11 Trigger Frequency Count

UNI-T UTD1025CL Specifications

General

Brand	UNI-T
Model	UTD1025CL
Category	Test Equipment
Language	English