81
Chater VIII Service and
Support
Product Program Upgradation
Two ways to acquire program upgradation
package: from UNI-T company market
department or via company website the user
can upgrade program of the present
oscilloscope by the embedded program
upgradation system in the oscilloscope to make
sure that program of the present oscilloscope is
the newly published program version of UNI-T
company
1. Own an UTD1025CL oscilloscope produced by
UNI T and acquire the type hardware and
software vision information of the present
oscilloscope through the system information
menu box under the CONFIGURE menu
2. To acquire from UNI-T company market
department or via company website the program
upgradation package that type and hardware
version is identical to the oscilloscope being
upgraded and software version is bigger than that
of the present oscilloscope
1. Product type of the program upgradation
package shall be in accord with that of the
oscilloscope being upgraded
2. Hardware version of the program upgradation
package shall be in accord with that of the
oscilloscope being upgraded
3. Software version of the program upgradation
package shall be bigger than or equal to that of
the present oscilloscope
1.Install the home computer software in disk
correctly in accordance with the home computer
installation instruction
,
.
-,
.
.
.
.
.
；
Preparations before Upgradation:
Program Upgradation Conditions
Program Upgradation
UTD1000L User Manual
To Next Page
Loading...
Need help?
General
