(13) DAY/NIGHT PROGRAMMING
x Enables to program the days and the hours of automatic passage into Night mode
(Machine in stand-by, reduced heating temperatures) and Day mode, followed or not of an
automatic cleaning cycle.
x The days of the week are represented by:
Monday
Tuesday Wednesday Thursday Friday Saturday Sunday
1 2 3 4 5 6 7
When they are selected, the corresponding figure are replaced by X.
To select or cancel a day, it's necessary to press the key when the day is blinking.
Note: When the automatic cleaning function is activated, the cleaning cycles are carried out
even if the passage Day o Night or Night o Day has been done manually (pressing the
Day/Night key).
(14) PRO. COFFEE SAFETY
x Enables to delete the coffee safety of all the hoppers in case of bad functioning of the
photo-cell sensors.
(15) PROGRAMMING OF TANGO EQUIPED WITH ONE OR TWO COINERS,
OR CONNECTED TO A CASH COMPUTER SYSTEM
According to the number of groups and the type of functioning requested, it is necessary to
program the corresponding code. The code 00 is given to the standard machine without coiner and
without cash computer connection.
Operational way :
a) Choose in the MENU:
b) Push on PRO during 3 sec
c) Push on PRO and select the code requested (see below) using the key + / - .
d) Confirm with the touch MENU.
N. COINER 00
> + / - PRO >> MENU
TANGO
WITHOUT COINER
N. COINER 01
> + / - PRO >> MENU
TANGO 1 GROUP - 1 COINER
CYCLE STARTING BY SELECTION OF ONE TOUCH
N. COINER 02
> + / - PRO >> MENU
TANGO 2 GROUPS - 2 COINERS
CYCLE STARTING BY SELECTION OF ONE TOUCH
N. COINER 03
> + / - PRO >> MENU
TANGO 1 GROUP - 1 COINER
CYCLE STARTING STRAIGHTLY BY TOKEN
N. COINER 04
> + / - PRO >> MENU
TANGO 2 GROUPS - 2 COINERS
CYCLE STARTING STRAIGHTLY BY TOKEN
N. COINER CD
> + / - PRO >> MENU
CASH
COMPUTER SYSTEM IN MODE CREDIT / DEBIT
N. COINER DC
> + / - PRO >> MENU
CASH COMPUTER SYSTEM IN MODE DEBIT / CREDIT
C – 10
N. COINER
> + / - > PRO3 >> MENU
To Next Page
Loading...
