24
DATA & CAPACITY PLATES AND DECALS (cont’d)
SAFETY RULES AND PRACTICES
• This decal instructs the operator that no personnel should be
riding on the unit.
!
WARNING
!
NO RIDING DECAL - 2W1 ONLY
• This decal instructs the operator that when coast control is
engaged, the brake will be released and must be manually
applied. Manually applying the brake requires the operator to
fully raise or lower the tiller handle (refer to page 29).
!
WARNING
!
COAST CONTROL DECAL - OPTION 2W2 ONLY
• This decal instructs the operator that when
coast control is engaged, the brake will be
released and must be manually applied.
Manually applying the brake requires the
operator to fully raise or lower the tiller
handle (refer to page 30).
!
WARNING
!
SOLENOID COAST CONTROL DECAL - OPTION 2W2 ONLY
• This decal instructs the operator to watch for obstructions,
do not position any device that will interfere with movement
of control handle, tube is not a handhold and maximum
weight limit.
!
WARNING
!
ACCESSORY POLE DECAL - OPTION 2W2 ONLY