42
LOAD CARRYING MECHANISM
OPTIONAL LOAD BACKREST EXTENSIONS
The 2W1 models have two types of load backrest options available
and the 2W2 models have three types. Load Backrests can come
in different heights depending on each application's needs or
requirements.
Bolt-On 2W2 Only
Slip-On 2W1 and 2W2
Tilt-Down 2W1 and 2W2
OPERATING CONTROLS AND FUNCTIONS
• The load backrest extension is only to assist in stabilizing a
load being carried and to help reduce the possibility of the
load falling onto the operator.
• The load backrest extension is not made or meant to push or
pull loads or other equipment.
Slip-On Type
The slip-on load backrest extension has channels that slide onto the
load backrest on the fork side of the battery compartment.
To remove this backrest extension, fully lower the forks and turn off
the ignition switch. Then slide the backrest extension up until it clears
the unit's load backrest. Always follow your company's policy for lifting
objects to help reduce the risk of injury.
CAUTION
!
To Next Page
Loading...
