27
OPERATING CONTROLS AND FUNCTIONS
STEERHEAD AND TILLER ASSEMBLY
1. Safety reverse button
2. Horn button
3. Lift button
4. Lower button
5. Rotary thumb controls
6. Steer tiller
7. Electronic activated coast control switch (optional 2W2 only)
8. Sidetracker button (optional 2W2 only)
SAFETY REvERSE bUTTON
This red button is provided to reverse the travel direction should the
operator get caught between the steerhead and a xed object. If the
button contacts the operator, the truck will reverse and move away from
the operator at full throttle for about one second and then reduce to
slow speed as long as the button is depressed. This button will override
all forward travel.
HORN bUTTON
Pushing the button located on top of the steering control handle will
sound the horn, regardless of key position.
LIFT bUTTON
Lifting (raising the load carrying mechanism) is controlled by pushing
down on the lift button, either side of steerhead. This device will
continue to raise as long as the button is depressed or until the load
carrying mechanism activates the lift limit function. Releasing the button
will automatically stop the raising.
LOWER bUTTON
Lowering (lowering the load carrying mechanism) is controlled by
pushing down on the lower button, either side of steerhead. This device
will continue to lower as long as the button is depressed or until the
lowering stops are reached. Releasing the button will automatically stop
the lowering.
1
2
33
44
5
5
6
7
7
8
8
To Next Page
Loading...
