25
OPERATING CONTROLS AND FUNCTIONS
APPLICATIONS
The 2W1/2W2 share many of the same controls and frame parts, but
have different operation functions. The 2W1 can only be operated in
a walkie mode and the 2W2 can be operated in both the walkie and
riding mode. The truck is available in different fork lengths and lifting
heights. Refer to the truck’s data plate for this information.
The trucks are equipped with a 24 Volt electrical system. Travel and
lifting speeds are transistor controlled to provide smooth operations. In
addition, the travel function and the different hydraulic functions have
additional controls which further enhance these features. Different
speeds can be set by a trained service technician.
APPLICATION AREA FOR UNICARRIERS TRUCKS
UniCarriers industrial trucks are solely designed and manufactured
to handle goods. The truck should only be tted with the appropriate
accessories relevant to the application.
PROHIBITED APPLICATIONS FOR UNICARRIERS
TRUCKS
It is not permitted to use these trucks for other purposes including the
following:
• Do not operate in areas that contain gases which can cause
re or explosions
• Do not use as a towing truck for trailers
• Not to be used for pushing applications
• Do not tow other lift trucks
• Do not transport or lift passengers
• Do not drive on any non-paved areas (refer to page 19)
!
WARNING
!
To Next Page
Loading...
