m90User’s Guide
© 2007 Unication Co., Ltd.
31
7. Managing Outgoing Messages
Messages that you send are stored in the Outbox. Each message has a symbol indicating its
current status:
message transmission in progress
message successfully sent
message transmission pending (transmitter may be off, or network is busy)
message transmission failed.
Select OUTBOX
in the Main Menu to display your sent messages.
7.1 Reviewing Sent Messages
You can read messages that you have sent in the same way that you read received messages:
1. Select OUTBOX
in the Main Menu and scroll to the desired message.
2. Press ENTER to select and open the message for viewing.
7.2 Resending a Message
You can resend a message that was not sent successfully.
1. Select OUTBOX
in the Main Menu to view messages that you have sent.
2. Scroll to the message you wish to resend.
3. Press MENU to open the Outbox Options popup menu and select Resend to resend the
message to the same recipients as before.
7.3 Deleting Messages
Messages can be deleted from the Outbox.
1. Select OUTBOX
in the Main Menu, and scroll to the message you want to delete. Note that you
cannot delete a “transmission in progress” message.
2. Press MENU to open the Outbox Options popup menu and select one of:
Delete to delete a single selected message; alternatively, you may press ALT-DEL
Delete All Msgs to delete all messages in your Outbox.
If you have set the Confirm Delete option (
PREFERENCES → Options → Confirm Delete) to
“Yes”, then you will be asked to confirm or cancel the deletion.
To Next Page
Loading...
