74
[MENU] Program System F
Select a system F
Edit Sys Option F
Set Record F
This setting controls how the scanner handles the record option for channels in the
system.
All Channel — The scanner sends the audio for all channels in the system to
the REC jack, regardless of the channel’s record option setting.
Marked Channel — The scanner only sends the audio for channels that have
the Record option turned on to the REC jack.
Off — The scanner does not send any audio from any channel in the system to
the REC jack, even if the record option is turned on for a channel.
Note: In order for the function to work, you must set the channel to record. You
must also set the system’s record option to either All Channel (which will record
all channels regardless of the channel’s record setting) or Marked Channel
(which only records the channels you’ve set to record).
[MENU] Program System F
Select a trunked system F
Edit Sys Option F
Rvw ID:Srch L/O F
The scanner displays each ID you have locked out in ID Search mode and gives
you the option to unlock the ID. To unlock an ID, rotate the scroll to select the
locked out ID, then press [E
YES]. If no ID’s are locked out, the scanner displays
“Nothing Locked / Press Any Key.”
[MENU] Program System F
Select a trunked system F
Edit Sys Option F
Clr All L/O IDs F
To quickly unlock all IDs in the system, answer “Y” to “Confirm? Unlock All (Y/N).”
Setting the System Record Option MELCS
Reviewing ID Search Lockouts MEL
Clearing All Locked Out ID’s MEL
To Next Page
Loading...
Need help?
General
