Unify CP200 - Logging on with Forced, Delayed Logoff at a Remote Phone

131
Logging on with forced, delayed logoff at a remote
phone
If the remote phone is busy and your administrator enabled "Forced logoff during
call" with a set timeout, forced logoff does not occur until this timeout expires.
Logon via a key
If a program key is configured for Mobility.
Press the Taste.
or Logon via the context menu
Select from the idle display context menu and confirm  page 19.
You are prompted to enter your Mobility ID.
j Enter and confirm Mobility ID – usually a phone number.
You are prompted to enter the password.
j Enter and confirm the user password.
The following mobility messages appear in the display:
• Validating
• Logging off elsewhere
• Registering
• Downloading user data
Once logon is complete, the "Mobility" program key LED lights up and the Mo-
bility icon appears on the display .
Mobility
_
Mobile logon
Please enter mobility ID
Enter password
At the same time, the display on the busy remote phone shows "Forced
logoff pending". After the set timeout the active call is ended and remote
logoff is performed.