Unify CP200 - Configuring a Variable Call Forwarding Key

67
Configuring a variable call forwarding key
With "Variable call forwarding" key you can
• Immediately activate or deactivate the call forwarding for "All calls"  page 49
• Edit the call forwarding
 page 50
Ideally you should use the previously configured forwarding key for forwarding.
z You can also program the keys via the WEB interface  page 160.
Hold down one of the four keys to which a function is to be assigned until the
programming prompt is displayed.
Confirm to begin programming. The key illuminates continuously.
Select and confirm the option shown to program the first level for instance.
Select and confirm the option shown.
Select and confirm the option shown. Relabel the key field if appropriate
(
 page 166)
ß
_
OK
Normal = f
Built in fwd f
Save & exit l