Unify CP200 - Settings

138
Settings
Room character
To ensure that the other party can hear you properly in speakerphone mode, you
can adjust the phone to the room acoustics by choosing one of the following
room character conditions: "Normal", "Echoing", "Muffled".
z You can also configure this setting via the WEB interface  page 160.
@ Press the key shown.
Select and confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the room character (for example, "Normal").
Select and confirm the option shown.
Ringer
If your administrator has loaded suitable files to the phone, you can select a real-
tone file in "*.mid" and "*.wav" format for the ringer. If no individual audio files are
available, the "pattern" ringer is preset.
z You can also configure this setting via the WEB interface  page 160.
@ Press the key shown.
Select and confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Confirm the option shown. Select the required ringer file
[
1
]
or pattern. You will im-
mediately hear the associated ringer melody. Confirm the current ringer file.
Select and confirm the option shown.
Pattern melody
z You can also configure this setting via the WEB interface  page 160.
Prerequisite: You have chosen the "pattern" ringer, see  page 138.
User
Audio
Settings?
Room Character = Normal f
Save & exit l
User
Audio
Settings?
Ringer file = abc.mid f
abc.mid? f
1. The phone displays the current setting
Save & exit l