152
Call recording with AutoStart
Standby mode is activated in principle in idle mode. The recording button LED
lights up. You cannot switch off the recorder. As soon as a call is set up, call re
-
cording starts automatically.
^ Lift the handset.
or
: Press the key shown.
[ The subscriber answers. You hear a beep, the recording symbol | is shown
on the display and the recording button LED remains lighting. The call is now be
-
ing recorded. (see also page 150)
You can pause the recording at any time and continue it again.
] or : If you end the call, the AutoStart process is set up again for the next call.
Controlling call recording
Starting call recording manually during a call
Prerequisite: Manual mode or AutoStart is selected. You are conducting a call.
Recording has not started. The recording button LED is not lighting.
[ You are conducting a call (see also page 150).
Press the recording button to start the recording - the LED key lights up.
You hear a beep and the recording symbol | is shown on the display. The call
is now being recorded. (see also
page 150)
Pausing call recording manually during a call
Prerequisite: Manual mode or AutoStart is selected. You are conducting a call.
Recording has started. The recording button LED lights up.
[ You are conducting a call (see also page 150).
Press the recording button to pause the recording - the LED extinguishes and
the recording symbol
| on the display disappears.
You can start the recording again at any time, for example to continue recording
the current call.
Recording
_
Recording
¤
To Next Page
Loading...
