Unify CP200 - Rejecting a Call

71
or Deflecting to a DSS number
A call can be deflected to a direct station selection (DSS) subscriber using the
DSS key, if the key is configured and the deflect function is activated by your ad
-
ministrator  page 114.
Information only, as set by the administrator: Yes or No.
Select and confirm the option shown.
Rejecting a call
You can reject an incoming call.
An incoming call is displayed or signaled.
Select and confirm the option shown.
The caller hears a busy signal.
Deflect to DSS = Yes m
Save & exit l
ñ
"Reject" must be authorized by the administrator.
Reject? f
If the rejected caller's phone number is transmitted, it is saved in the call
list. You can then call this party back at a later time.