Unify CP200 - Assigning a Destination Phone Number to a Call Type; Activating;Deactivating Call Forwarding

60
Assigning a destination phone number to a call type
Prerequisite: At least one destination phone number has already been saved.
Press the function key to open forwarding.
The pop-up menu opens:
Select and confirm the option shown.
Select and confirm the forwarding type (here for instance Unconditional ).
Select and confirm the destination call type (here for instance Internal).
Select and confirm a previously saved destination.
The call type is activated and the new destination is displayed.
@ Press the illuminated key to open the call display.
Activating/deactivating call forwarding
Prerequisite: One or more forwarding destinations are already configured for
the relevant call type(s).
Press the function key to open forwarding.
The pop-up menu opens:
The message:
"Set forward on to" is displayed with the number of the last forwarding destina-
tion and you have the following options:
• Accept
• Set a forwarding destination
• Edit call forwarding
• Cancel
Select and confirm the option shown.
The list of forwarding types is displayed
• Uncond’l
•Busy
• No reply
Select and confirm the option shown (e.g. ).Uncond’l
Choose one of the call types offered:
All Calls: 3339 (deactivated is the default setting)
External: 3335
Internal: 3336
and confirm your selection. Here for example External.
Select and confirm the option shown. The call type is activated. This type of call
is deactivated with Turn off.
ß
_
Edit call forwarding? f
Uncond’l l
 Internal f
3336 f
 Internal: 3336 l
ß
_
Edit call forwarding? f
Uncond’l l
 External: 3339 l
Turn on: l