Unify CP200 - Dialing a Phone Number from a List; Using Autodial Delay

89
Dialing a phone number from a list
The following call lists are available under Konversationen:
• Missed (x)
• Dialled (x)
• Received (x)
• Forwarded (x)
Press the key shown.
Select and confirm the option shown.
Select and confirm the appropriate list entry.
The phone number associated with the list entry is dialed. If you have not al-
ready lifted the handset, conduct the call now in speakerphone mode.
Using autodial delay
A number is automatically dialed after a set delay starting from the entry of the
number's last digit. The autodial delay can be used:
• when dialing in idle mode
• during a consultation
• when transferring an answered call.
The delay can be reduced by performing one of the following activities:
Z • Pressing the key shown. This always works.
^ • Lifting the handset. This only works if the phone number was entered when the
phone was idle or if it was entered for a consultation call when the handset was
off hook.
: • Pressing the loudspeaker key. This only works if the phone number was en-
tered when the phone was idle and the loudspeaker key was not illuminated
or if the phone number was entered for a consultation call and the loudspeaker
key was not illuminated.
For a detailed description of the call lists, see  page 23. Pay attention to
the notes on  page 96.
Þ_
Dialled (x) f
Niels, Bohr 30.05. 07:06am
If an emergency number is preset by your administrator, the autodial delay
for this phone number is reduced to one second.
Automatic dial delay does not work if you are using a dial plan and Imme-
diate dialling is configured (see  page 40). The number is automatically
dialed as soon as the string entered matches an entry in the dial plan.