Unify CP200 - Page 139

139
@ Press the key shown.
Select and confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the required pattern melody
[
1
]
between 1 and 8 (e.g. 4). You
will immediately hear the corresponding Ringer melody. Confirm the selected
Ringer melody.
Select and confirm the option shown.
Pattern sequence
z You can also configure this setting via the WEB interface  page 160.
Prerequisite: You have chosen the "pattern" ringer, see  page 138.
@ Press the key shown.
Select and confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select the required Ringer sequence in the context menu between 1 and 6 (e.g.
2). You will immediately hear the set Ringer melody with the selected Ringer se
-
quence. Confirm the selected setting.
Select and confirm the option shown.
User
Audio
Settings?
Ringer melody = 2 f
Save & exit l
User
Audio
Settings?
Ringer sequence = 2 f
Save & exit l