Unify CP200 - Page 76

76
Setting the hold reminder time
Use the "Hold rem. delay" function to set the time after which you want to receive
an automatic reminder about a held call.
The minimum value is 3, in other words, the reminder is output after three min-
utes. The maximum value is 15 minutes.
z You can also configure this setting via the WEB interface  page 160.
@ Press the key shown.
Select and confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
μ€ Select a value between 1 and 15 and confirm.
Select and confirm the option shown.
User
Configuration
Connected calls?
Hold rem. delay=3 f
Save & exit l