Unify CP200 - Page 91

91
Allowing "Busy When Dialing"
If you activate this function, an incoming call received while you are dialing is re-
jected. The caller then hears the busy signal.
z You can also configure this setting via the WEB interface  page 160.
@ Press the key shown.
Select and confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
User
Configuration
Outgoing calls
Busy when dialling = No m
Yes l
Save & exit l