Unify OpenScape WLAN Phone WL4 Administrator Documentation

General
Authentication Levels and Default Password
Figure 5: The Advanced Configuration Page
Authentication Levels and Default Password
The product has five different authentication levels:
• User rights are required for the administration of the phonebook. Default user name and
password are “user” and “password”.
• Administrator rights are required for the setup, the configuration and administration, simple
troubleshooting and changing passwords (except for the sysadmin password). Default user
name and password are “admin” and “changeme”.
• System Administrator rights is used for advanced troubleshooting. It gives access to all ad-
ministration pages and the permission to change all passwords. Default user name and pass-
word are “sysadmin” and “setmeup”.
• Auditor rights gives basically the same access as Administrator rights, but without permission
to alter values. There is no access to the setup wizard or the Device Manager. Default user
name and password is “auditor” and “readonly”.
• Different levels of password policy can be set in, see Set Password Policy on page 14.
Functionality matrix
The following matrix shows which functionality that can be used by the different authentication
levels.
anonymous user admin sysadmin auditor
Phonebook administration
NetPage login
No Yes Yes Yes No
View configuration settings No No Yes Yes Yes
A31003-M2000-M105-01-76A9, 29/06/2020
Wireless Service Gateway WSG, Administrator Documentation 13

Unify OpenScape WLAN Phone WL4 Specifications

General

Brand	Unify
Model	OpenScape WLAN Phone WL4
Category	Telephone
Language	English