Device Manager
File management
3) In the License menu, select “Move license...” or right-click and select “Move license...”. The
Move license window opens.
4) Select the device that shall receive the license. Click “OK”.
If no devices are shown in the Move license window, there are no devices that are selectable
to move the license to.
The device type of the handset that received the license, is still unchanged in the Device
Manager. Select this handset and do the following:
5) In the Licenses menu, select "Refresh" to complete the transfer of the license. The device
type of the handset is now updated in Device Manager.
Refresh License
If a device is already registered in the Device Manager and new license has been purchased
from the license web, the information needs to be updated. By doing a Refresh, the device li-
cense information in WSG is synchronized with the information in the license server and trans-
ferred to the device.
This feature requires a connection to the license server.
1) Select the License tab.
2) Select device(s).
3) In the License menu, select “Refresh”. The correct license is fetched from the license server,
sent to the device and displayed in the Device Manager.
Remove Devices from the License View
This command removes devices from the Licenses tab view.
1) Select the “Licenses” tab.
2) Select the device(s) that shall be removed from the list. The selected row(s) are highlighted.
3) In the License menu, select “Delete” or right-click and select “Delete”.
4) Click “Yes” in the Remove device dialog. The dialog closes and the device is removed from
the list.
File management
This chapter covers file management for parameter definition files, software files, language files
and company phonebook files.
Import and export of templates and Numbers is described in Import/Export Numbers and Tem-
plates on page 58. Import of translation files is described in Administration of Language and
User Interfaces on page 76.
The parameter definition file holds the definitions of all parameters for a specific version of a
Number’s parameter set. Updated software and new parameter definition files for devices and
Numbers can be added to the Device Manager, see Import Parameter Definition Files on page
54 and Import new Software for Devices on page 55.
If there is a naming conflict when importing, a warning message is displayed.
A31003-M2000-M105-01-76A9, 29/06/2020
Wireless Service Gateway WSG, Administrator Documentation 53
To Next Page
Loading...
Need help?
General