14 Getting to know your OpenStage phone
Programmable function keys
Your OpenStage 30 T has eight illuminated keys to which you can assign functions or numbers.
Depending on how they are programmed, you can use the keys as:
• Function key Page 52
• Repdial/Direct station selection key
Page 56
Each key can be programmed with one function.
Press the key briefly to activate the programmed function or dial the stored number.
Your OpenStage is delivered with label strips. Write functions or names in the white fields on the
label strips.
The status of a function is shown by the LED on the corresponding function key.
Meaning of LED displays on function keys and DSS keys
Increase the number of programmable function keys by connecting a key module
Page 12.
The configuration of direct station selection keys must be activated by your service person-
nel.
Direct station selection keys can be assigned an internal number from the HiPath 4000 net-
work.
LED Meaning of function key Meaning of DSS key
S
Off The function is deactivated. The line is free.
T
Flashing
1
1 In this manual, flashing keys are identified by this icon, regardless of the flashing interval. The flashing interval repre-
sents different statuses, which are described in detail in the corresponding sections of the manual.
Indicates the function status. The line is busy.
R
On The function is activated. There is a call on the line.
The programmable keys on multi-line phones function as trunk keys Page 75.
To Next Page
Loading...
Need help?
General