Unify OpenStage 30 T User Manual

24 Basic functions
Reject calls
You can reject calls which you do not wish to take. The call is then signaled at
another definable telephone (contact your service personnel).
s Press the "Disconnect" key.
If a call cannot be rejected, your telephone will continue to ring. The message
"Currently not possible" is displayed (e.g.
in the case of recalls).
Turning the microphone on and off
To prevent the other party from listening in while you consult with someone in
your office, you can temporarily switch off the handset microphone or the hands
-
free microphone. You can also switch on the handsfree microphone to answer
an announcement via the telephone speaker (speaker call,
 Page 40).
Prerequisite: A connection is set up, the microphone is activated.
p Press the "microphone" key. The microphone is deactivated.
or
p Press the illuminated "microphone" key. The microphone is activated.

Unify OpenStage 30 T Specifications

General

Wall Mountable	Yes
Display	2 lines
Keys	8 freely programmable keys
Connectivity	TDM
Keypad	12-key
Hands-free operation	Yes, full duplex
Headset Port	Yes
Message Waiting Indicator	Yes
Audio	Full-duplex hands-free speakerphone, HD voice