Unify OpenStage 30 T - Forwarding Calls on Trunks

78 Making calls in the team/executive/secretary configuration
Transferring a call in progress
S Press the DSS key and announce the call if necessary.
\ Replace the handset.
or
s Press the key shown.
Accepting a call for another team member
T Press the flashing DSS key or trunk key.
^ Lift the handset.
or On-hook dialing: Speakerphone mode.
Forwarding calls on trunks
You can immediately forward internal or external calls to different internal or ex-
ternal telephones (destinations). (External destinations require special configu-
ration in the system).
Activating call forwarding for one trunk activates the function for all trunk keys
assigned to this trunk in your group.
N Open the Program/Service menu  Page 17.
Select and confirm the option shown.
or
S If available, press the "CFW MULAP" key. 
(You have programmed a key with the incomplete "CFW MULAP" function, ex-
cluding the call forwarding type and destination  Page 52.)
S Press the required line key.
or
j Enter the required trunk number.
Select and confirm the option shown.
or
select and confirm the option shown
or
select and confirm the option shown.
j Enter the destination number.
Confirm.
or
S If available, press the "CFW MULAP" key. (You have stored the call forwarding
type and destination on the "CFW MULAP" key,
 Page 52.)
Forward MULAP on
1=all calls
2=external calls only
3=internal calls only
Save