Unify OpenStage 30 T - Programming a Procedure Key

Programming the function keys 55
Programming a procedure key
Numbers and functions which require further input, i.e. which contain several op-
erating steps, can be saved on a key on your telephone. The relevant service
personnel must be granted appropriate authorization.
For example the function "Associated dialing"  Page 42 together with the re-
quired input (phone number to be dialed) can be saved on a key.
Numbers which require further input can also be saved.
N Open the Program/Service menu  Page 17.
Select and confirm the option shown.
S Press the key shown.
Confirm.
Select and confirm the option shown.
Select and confirm the option shown.
j Enter procedure. Example: *67 231 123456
*67 Code for associated dial
231 Number of the phone for which the call should be made
12345 the number to be called.
if nec. S Press "Pause" to enter pauses (a "P" appears on the display).
Confirm.
or If you make a mistake:
Select and confirm the option shown. This deletes all entered digits.
Confirm.
or
Select and confirm the option shown.
*91=Key assignment
Change key
More features
Procedure key
Save
previous
Exit
Another key
Select the saved procedure by pressing the key.
Procedures with activatable/deactivatable functions are activated with one
press of the button and deactivated with the next.
You can press the procedure key during a call to automatically send the
saved digits as DTMF signals
 Page 48. For display messages when
saving procedures, see  Page 89.