Unify OpenStage 30 T - Basic Functions; Answering a Call

18 Basic functions
Basic functions
Answering a call
Special default ring signaling is set for your telephone:
• When you receive an internal call, your telephone rings once every four sec-
onds (single-tone sequence).
• When you receive an external call, your telephone rings twice in rapid succes-
sion every four seconds (dual-tone sequence).
• When you receive a call from the entrance telephone, your telephone rings
three times in rapid succession every four seconds (triple-tone sequence).
• If a call is waiting, you hear a short tone (beep) every six seconds.
The number or the name of the caller appears on the display.
Answering a call via the handset
The phone rings. The caller is displayed.
^ Lift the handset.
if nec. + or - Set the call volume.
Please read the introductory chapter "Getting to know your OpenStage
phone"
 Page 11 carefully before performing any of the steps described
here on your phone.
Your service personnel can adjust the ring cadence for external and inter-
nal calls for you. In other words, different ring cadences can be set for dif-
ferent internal callers.