Unify OpenStage 30 T - Call Forwarding

26 Basic functions
Call forwarding
Using variable call forwarding
You can immediately forward internal or external calls to different internal or ex-
ternal telephones (destinations). (External destinations require special configu-
ration in the system.)
r Press the forwarding key.
or
: Open the idle menu  Page 15.
Select and confirm the option shown.
Confirm
or
select and confirm the option shown
or
select and confirm the option shown.
j Enter the destination number.
Confirm.
Deactivating call forwarding
Select and confirm the option shown.
When call forwarding is active, a special dial tone sounds when you lift the
handset.
If DID DTMF is active (contact your service personnel), you can also for-
ward calls to this destination. Destinations: Fax = 870, DID = 871, Fax-DID
= 872.
If you are a call forwarding destination, your display will show the number
or the name of the originator on the upper line and that of the caller on the
lower line.
Forwarding on?
1=all calls?
2=external calls only?
3=internal calls only?
Save?
Forwarding off