Unify OpenStage 30 T User Manual

Making calls in the team/executive/secretary configuration 79
Deactivating call forwarding
N Open the Program/Service menu  Page 17.
Select and confirm the option shown.
R Press the required line key.
or
j Enter the required trunk number.
or
R If available, press the "CFW MULAP" key.
Understanding LED messages of the "CFW MULAP" key
S The LED on the "CFW MULAP" key is off - call forwarding is not active for this
trunk.
or
R The LED on the "CFW MULAP" key lights up - call forwarding is active for this
trunk.
or
T The LED on the "CFW MULAP" key is flashing slowly, the trunk is the call for-
warding destination.
Forward Line: Off
If you have activated call forwarding for a trunk, a special dial tone sounds
when the line is seized.

Unify OpenStage 30 T Specifications

General

Brand	Unify
Model	OpenStage 30 T
Category	Telephone
Language	English