- 2 -
1.3 Nameplate Information
Technical information for a specific unit appears on the unit nameplate, which is attached to
the indoor and/or the outdoor units.
The unit nameplate includes the following information:
MODEL Air-conditioner model name
SERIAL NUMBER Serial Number of the unit.
CLIMATE CLASS Class T1 – Standard conditions.
VOLT/PHASE/Hz A/C power supply, for example: 400/3/50 = 400V/3 Phase/50 Hz.
COS φ
Power factor for the unit.
FUSE Required fuse size, Amp.
CAPACITORS μF
Compressor capacitor, Outdoor Fan capacitor (wherever applicable)
REFRIGERANT Type and Quantity of refrigerant charge, Gr.
CAPACITY W Cooling and heating capacity in Watts according to ISO 5151 standard.
CAPACITY BTU/H Cooling and heating capacity in BTU/Hr. according to ISO 5151 standard.
INPUT POWER Power consumption in cooling and heating modes, watts.
AMP. Current consumption in cooling and heating modes, Amp.
WEIGHT Kg. Weight of the unit, Kg.
The indoor unit nameplate includes the following information:
MODEL Air-conditioner model name and unit type
CAPACITORS μF
Indoor Fan capacitor (wherever applicable)
AIR FLOW m³/h Air Flow at High Speed in m³/h
AIR FLOW cfm Air Flow at High Speed in cfm
WEIGHT Kg. Weight of the unit, Kg.
To Next Page
Loading...
