US Robotics COURIER - Page 130

Register
Default
S32
1
-
-
-
S34
0
-
-
-
COURIER HIGH SPEED MODEMS
Function
Sets the function for the Voice/Data
switch. This is not a bit-mapped register.
Select
the value for the desired function,
for
example, ATS32=6.
Value Result
0 Disabled
1
Voice/data, Originate mode
2 Voice/data, Answer mode
3 Redial last number
4 Dial number stored at
position 0
5
Auto Answer on/ off toggle
6 Reset the modem
7 Initiate Remote Digital
Loop back
8 Busy out phone line toggle
Bit-mapped register. See instructions for
S13.
Bit Value Result
0 1 Disable V.32 bis. Used for
1
2
troubleshooting; USRobotics'
Technical
Support may require
that you disable V.32 bis for
testing purposes.
2 Disable the modem's enhanced,
proprietary V.32 bis modula-
tion. Used for troubleshooting.
4 Disable the faster retrains that
occur during proprietary V .32
bis modulation. Used for trou-
bleshooting.
3 8 Enable V .23.
Required for
some British connections.
4 16
Change MR LED to DSR
5 32 Enable
Ml/MIC; see Appendix
E.
6 64 Disable the remote access busy
message.
7 128 Reserved.
Summaries and Tables 8-19