US Robotics COURIER - Result Code Sets (Xn)

-
-
-
-
-
-
COURIER HIGH SPEED MODEMS
modulation, are using HST error control protocol, and are
using V.42 bis compression.
CONNECT 16800/ ARQ/HST /HST /V42BIS [or MNPS]
CONNECT 14400/
ARQ/V32/LAPM/V42BIS [or MNP /MNPS]
CONNECT 9600 /SYNC
CONNECT 2400/ ARQ/MNP /MNPS [or LAPM/V42BIS]
CONNECT
2400/NONE
NOTE: Although these codes will return numeric identifiers,
they are the same numeric identifiers used for &A2 result codes.
If the modem is in Numeric Mode (VO) and set to &A3, you will
not be able to differentiate between &A2 and &A3 result codes.
&A3
result codes may not be compatible with some software.
Result Code Sets (Xn)
You have eight options, 0 through 7, for selecting the result code
subset best suited to your applications.
Result Codes
O/OK
I/CONNECT
2/RING
3 /NO CARRIER
4/ERROR
5/CONNECT 1200
6/NO DIAL TONE
7 /BUSY
8/NOANSWER
9/RESERVED
10/CONNECT 2400
11/RINGING
12/VOICE
13/CONNECT 9600
18/CONNECT 4800
20/CONNECT 7200
21/CONNECT 12000
25/CONNECT 14400
43/CONNECT 16800
Functions
Adaptive Dialing
Wait for
2nd Dial Tone (W)
Wait for Answer(@)
Fast Dial
Setting
XO Xl X2 X3 X4 XS X6 X7
Table 5-1. Result Code Options
Internal Controls 5-7