Utax P-C2665 MFP

Basic Operation
3-16
• Binding Left/Right: Images on the second sides
are not rotated.
• Binding Top: Images on the second sides are
rotated 180°.
Two-sided to Two-sided
Produces two-sided copies from two-sided originals.
The document processor is required.
NOTE: The paper sizes supported in Two-sided to Two-sided are Legal, Letter, Statement, 16K, ISO B5,
Oficio II, Executive, A4, B5, A5, Folio and Envelope C5.
The procedure for using two-sided/duplex copying is explained below.
1 Press the Function Menu key. Function Menu
appears.
2 Press the  or  key to select [Duplex].
3 Press the OK key. Duplex appears.
4 Press the  or  key to select the desired duplex
copying mode.
If you select [1-sided>>2-sided], press [Detail] (the
Right Select key) and you can select the binding
edge of the finished copies and the original setting
orientation.
Original Copy
5
3
4
1
2
5
3
4
1
2
Function Menu: a b
*********************
2 Collate T
3
Duplex T
[ Exit ]
1 Paper Selection g
Duplex: a b
*********************
2 1-sided>>2-sided
3 2-sided>>1-sided
1 *1-sided>>1-sided
Finish. Binding: a b
*********************
2 p Top
1 * o Left/Right