Utax P-C2665 MFP

Sending Functions
5-8
Duplex Sending
Select the type and binding of original depending on the original.
Part that is operated
The table below lists the binding directions for each original type.
Use the procedure below to select the original type and binding direction when sending scanned originals.
1 Press the Send key.
2 Place the originals on the platen or in the
document processor.
3 Press the Function Menu key. Function Menu
appears.
4 Press the  or  key to select [Duplex].
5 Press the OK key. Duplex appears.
Original Type Binding
1-sided Sheet Original 1-sided —
2-sided Sheet Original 2-sided Binding Left/Right,
Binding Top
Function Menu: a b
*********************
2 Original Size T
3
Original Image T
[ Exit ]
1 Color Selection g
Duplex: a b
*********************
2 2-sided
1 *1-sided